Installing a Brick Paver Walkway or Brick Testing Machine

The use of Bricks or Pavers to create a sidewalk or patio complements a home in a way that is unequaled. In addition, setting up a Brick or Paver pathway does not always require a pro.

The secret to installing a Brick or Paver Walkway is to very first effectively prepare the location where the bricks/pavers are to be installed. The location must be removed at least a foot down, eliminating all topsoil and clay soil. In addition, string lines should be strung on each side of the pathway. The string lines show the finished height of the pathway.
As soon as the location has actually been dug down, 3/4" gravel stone need to be laid in and tamped down tightly. The height between the tamped down sand and the stringline should equal the density of the brick or paver.

Now that you have a stable base, place a 1" pipeline or journal board the length of the sidewalk on either side of the sidewalk. Using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will create a level surface area to lay the bricks/pavers.

Now place on the level sand/stone dust strips of plastic brick borders. Install a run on both sides of the ready area. These strips will act as your sidewalk border and assistance to maintain the stability and shape of the pathway.

The key to laying the bricks/pavers is to make sure that they interlock with each other. Always stagger surrounding rows of bricks by 1/2 of a brick to website interlock them. This will again assist maintain the integrity of the sidewalk.

Undoubtedly bricks/pavers will need to be cut or split when building the walkway. To actually cut/split the brick/paver, lay it in a bed of sand and place the chisel at a 75 degree angle over the spot where you want to break the brick. If your pathway has curves you will need to buy/rent a wetsaw.

After installing the bricks, develop the outdoors edges with extra sand, and after that shovel in the topsoil and load down strongly.
Lastly, spread stone dust over the new walkway and sweep into the cracks. Repeat this process a couple here of times to ensure the fractures are totally filled. This will finish the interlocking of the bricks and help to eliminate any weed development. Simply add grass seed to the outside edges and you ought to have a lovely entrance to your home within a number of weeks.


In addition, setting up a Brick or Paver sidewalk does not always require a pro. The secret to installing a Brick or Paver Walkway is to first correctly prepare the location where the bricks/pavers are to be set up. Now that you have a steady base, position a 1" pipeline or journal board the length of the sidewalk on either side of the sidewalk. These get more info strips will act as your sidewalk border and assistance to preserve the integrity and shape of the walkway. Inevitably bricks/pavers will require to be cut or divided when developing the pathway.

Leave a Reply

Your email address will not be published. Required fields are marked *